点击图片查看原图
“智能自动感应洗手液皂液器”参数说明
| 颜色： | 白色 | 出液方式： | 自动 |
| 材质： | 塑料 | 产品尺寸： | 240*240*160MM |
| 产量： | 5000台 |
“智能自动感应洗手液皂液器”详细介绍
Installation steps
1. Pour the liquid soap into the container, and cover it.
2.Put three "AA" alkaline batteriesinto the battery box, install batteries with the right way according to the chart of the battery box.Assemble the battery box into the soap dispenser.
3.This product can be used directly on the desktop or hander with wall bracket.
Use
1.Put the hand near theinductive zone and theliquid will flow out from the outlet.Please run several times until the liquid flow out of the dispenserduringthe first time use,because the soap haven’t flow into the liquid pipe.
2. If necessary pleasemove your hand andrepeat the step 1.
3.Thevolume is adjustable, totally four levels. Use ‘+’ button to add the volume, use ‘-’ button to reduce the volume.
NOTE AND MAINTENANCE
1. Choose an appropriate place to set the soap dispenser, make products protect from damping or touching water.
2.Don't put the soap dispenser device on mirror or strongreflectivesurface, don't put the soap dispenser deviceunderwater
3. It might affect induction sensitivity when use the soap dispenser under the strong sunlight.
4. This product is suitable for the liquid concentration is moderately,if the liquid concentration is too high it will result in liquid flowveryslowlyor stoppingflowing.
5. Please don’t use alcohol or other chemical liquid.
6. Please don't let the dust into soap dispenser, that may jam access point, if you find some dirty or impurity in the container, please change soap liquid.
7. Please use soap dispenser frequently, if you don’t use it for a long time, the liquid soap may solidification, then please
pour out the liquid and clean up the soap dispenser.
8. Please add soap when thesoap level indicator is blinking.
1. Pour the liquid soap into the container, and cover it.
2.Put three "AA" alkaline batteriesinto the battery box, install batteries with the right way according to the chart of the battery box.Assemble the battery box into the soap dispenser.
3.This product can be used directly on the desktop or hander with wall bracket.
Use
1.Put the hand near theinductive zone and theliquid will flow out from the outlet.Please run several times until the liquid flow out of the dispenserduringthe first time use,because the soap haven’t flow into the liquid pipe.
2. If necessary pleasemove your hand andrepeat the step 1.
3.Thevolume is adjustable, totally four levels. Use ‘+’ button to add the volume, use ‘-’ button to reduce the volume.
NOTE AND MAINTENANCE
1. Choose an appropriate place to set the soap dispenser, make products protect from damping or touching water.
2.Don't put the soap dispenser device on mirror or strongreflectivesurface, don't put the soap dispenser deviceunderwater
3. It might affect induction sensitivity when use the soap dispenser under the strong sunlight.
4. This product is suitable for the liquid concentration is moderately,if the liquid concentration is too high it will result in liquid flowveryslowlyor stoppingflowing.
5. Please don’t use alcohol or other chemical liquid.
6. Please don't let the dust into soap dispenser, that may jam access point, if you find some dirty or impurity in the container, please change soap liquid.
7. Please use soap dispenser frequently, if you don’t use it for a long time, the liquid soap may solidification, then please
pour out the liquid and clean up the soap dispenser.
8. Please add soap when thesoap level indicator is blinking.